Examples - Xerox 721P85530 Description

Examples

XEROX DOCUPRINT 180 LPS PDL REFERENCE
•
Resetting the segment number
You may set a new segment number after the current one is
terminated. This is accomplished when the system encounters
a series of two DJDEs: SPLIT=OFF followed by
SPLIT=(min,max).
In an online environment, banner pages are routed to the current job
output destination. For example, if a job is being sent to a third party
finishing device, the banner page will be sent there, also. The system
does not redirect banner pages to the sample tray or output bin
unless you specify that they be routed to a tray other than the job
destination. Refer to the "BANNER command" section of the chapter
"Using logical processing commands," for more information on
specifying banner pages.
The following are sample EXPORT commands:
EXPORT SPLIT=(2,7), SNUMBER=(1,75),
SEPARATORS=NONE;
EXPORT SPLIT=(2,7), SNUMBER=(1,75),
SEPARATORS=FIRST, SRECOVER=SEGMENT;
PRINT FORMAT COMMANDS
6-29