Points To Note; Example - Xerox 721P85530 Description

Points to note

Example

XEROX DOCUPRINT 180 LPS PDL REFERENCE
Note the following when using the ACCT command:
•
If the report completion code on the accounting page is non-
zero, an accounting page is delivered to the tray even if
USER=NONE is coded. This is done to notify the user of a
possible report integrity problem.
However, if the report is duplex and the first integrity problem
occurs within the last eight back sides, the report completion
code on the forced accounting page is zero.
•
Jobs aborted by input as a result of job recovery produce an
accounting page with as much accounting information as can
be salvaged. The accounting page is delivered to both the bin
and the sample tray.
•
When ACCT USER=BOTH is specified, the two accounting
pages show different values for "Output Processing Time." The
sheet sent to the stacker will show a time about one second
longer than the sheet sent to the sample tray. All other values
should match.
•
Hexadecimal strings in a DEPT parameter are interpreted as
standard EBCDIC and translated to Extended ASCII.
•
A completion code of 0 indicates that the report may have
completed successfully, except when a report integrity problem
occurs within the last eight duplex pages.
ACCT DEPT='BUDGET',USER=(BIN,TRAY);
After each report is printed, an accounting page is delivered to the
output bin and sample print tray. Accounting information for each job
(run under this ACCT command) is accumulated in the system
accounting log under the department name BUDGET. This assumes
the name BUDGET has been entered into the list of accounting
names (through the system level ACCOUNT parameter).
PRINT FORMAT COMMANDS
6-15