Jdl; Map - Xerox 721P85530 Description

JDL

MAP

XEROX DOCUPRINT 180 LPS PDL REFERENCE
The jdl-id specifies the name of the JDL to be invoked at the next
page boundary. The jdl-id must exist on disk in the JDL directory. If
only JDL is specified (not JDE) in the DJDE, the JDE to be used is
the one named in the START command. In a DJDE packet
containing a JDL parameter, other record- or page-oriented DJDE
parameters override parameters specified by the JDL DJDE.
Syntax JDL = option(s)
Options Table 8-35 lists the parameter option(s) and definition(s).
Table 8-39. JDL parameter option(s) and definition(s)
Option(s)
jdl-id
This parameter references a previously created font mapping file
(file-name) from a [label:] SEFFNT command
Syntax MAP = option(s)
Options Table 8-36 lists the parameter option(s) and definition(s).
Table 8-40. MAP parameter option(s) and definition(s)
Option(s)
file-name
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
Definition(s)
The jdl-id specifies the name of the JDL to be invoked
at the next page boundary.
Definition(s)
References a previously created font mapping file
(file-name) from a [label:] SEFFNT command
8-49