Stiming; Stocks - Xerox 721P85530 Description

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)

STIMING

STOCKS

8-66
This parameter is provided for possible compatibility with other Xerox
software supporting third party finishing devices and is ignored by the
Xerox DocuPrint 180 LPS. The STIMING DJDE, although ignored by
the DocuPrint 180 LPS, specifies that the printer accommodate
timing constraints needed by finishing equipment interfaced with the
Programmable Bypass Transport.
Syntax STIMING = option(s)
Options Table 8-55 lists the parameter option(s) and definition(s).
Table 8-59. STIMING parameter option(s) and definition(s)
Option(s)
(INTERVAL, sec)
(DELAY, sec)
Note: The sec specifies the time interval as a decimal number to a
tenth of a second.
This parameter defines the STOCKSET and its associated stock(s)
to be used in a report. If the stockset-name does not refer to a
STOCKSET command coded earlier in the same JDL, it is assumed
that the STOCKSET exists globally as an STK file, which is read at
print time. In this case, PDL inserts a message in the JSL file listing,
indicating that an STK file will be used at print time.
Whenever a new stockset is chosen, that is, at start of report or
through a DJDE JDE or JDL switch, each stock is checked to
determine that the stock exists and can be made active. This
provides an automatic method of changing stocks in the LPS as
required by the data stream.
Syntax STOCKS = option(s)
Options Table 8-56 lists the parameter option(s) and definition(s).
Table 8-60. STOCKS parameter option(s) and definition(s)
Option(s)
stockset-name Defines the STOCKSET used in a report.
Definition(s)
INTERNAL specifies the minimum allowable time
between end-of segment signals (by way of the
hardware interface at the bypass transport) for
consecutive segments. If additional time is required,
it is inserted after the last sheet is delivered and
before the end-of-segment signal is emitted.
DELAY specifies the minimum allowable time
between end-of-segment signal for one segment and
delivery of the initial sheet of the next segment
through the bypass transport,
Definition(s)
XEROX DOCUPRINT 180 LPS PDL REFERENCE