Table of Contents
Advertisement
SYSPPR
XEROX DOCUPRINT 180 LPS PDL REFERENCE
This parameter specifies the system page paper size for a job.
Syntax
OUTPUT SYSPPR = option(s)
Options
Table 6-65 lists the parameter option(s) and definition(s).
Table 6-66. SYSPPR parameter option(s) and definition(s)
Option(s)
USLEGAL
A3
A4
B4
USLETTER
( x, y )
There is no default.
Considerations
When centimeters (CM) are used to specify paper size, the maximum
allowable value is 32.767 cm.
SYSPPR is not available as a DJDE.
Whether you use the keyword or the (x, y) method, for specifying
papersize in your JSL, you must use the same method in your forms
source library (FSL).
PAPERSIZE=B4 and PAPERSIZE=(10.12,14.33) produce identical
results in that they indicate long-edge feed, as opposed to short-edge
feed format. Refer to the "SEFFNT" section in the chapter "Specifying
input parameters" for detailed information on short- and long-edge
feed.
Definition(s)
8.5 by 14 inches (216 by 279 mm)
16.54 by 11.69 inches (420 by 297 mm)
8.27 by 11.69 inches (210 by 297 mm)
10.12 by 14.33 inches (257 by 364 mm)
8.5 by 11 inches (216 by 279 mm)
x defines the slow scan direction in inches.
y defines the fast scan direction in inches.
PRINT FORMAT COMMANDS
6-81
Advertisement
Table of Contents
