Xerox 721P85530 Description page 102

SPECIFYING INPUT PARAMETERS
Option(s)
( byte ,( ccln
[ ccln
][,...])
2
4-14
Table 4-18. ASSIGN parameter option(s) and definition(s)
Definition(s)
, This option has the following components:
1
•
byte
The printer carriage control byte being defined. Its value is in the range 0 to
255 (X00 to XFF).
•
ccln
Specifies the action that should be taken when the printer carriage control byte
defined in byte is encountered. A ccln may be any of the following definitions:
— TOF
When byte causes the bottom-of-form (BOF) to occur, instructs the
printing system to go to the top-of-form (TOF) on the next page and to
stop spacing.
— IGN
When byte causes the bottom-of-form (BOF) to occur, instructs the
printing system to ignore it to continue spacing through the end of the
physical page. The page then transitions to top-of-form and spacing
continues.
— OVR
When byte causes the bottom-of-form (BOF) to occur, instructs the
printing system to go to the top-of-form (TOF) on the next pate and to
continue spacing.
The default is OVR.
•
Space print parameters - This has the following components:
Each of the three fields is optional; however, you must specify at least one
field. The range for the variables m and n is 0 to 15.
— field
1
Specifies the carriage action to take before printing. An example is the
ANSI carriage control:
– SP m
Space m lines before printing.
– SK n
Skip-to-channel- n before printing.
— field
2
Specifies whether printing occurs for this record:
– P
Print the output data at the line number computed after field1 is
processed.
– N
No printing occurs for this record (default).
— field
3
Specifies the carriage action to take after printing. An example is the
IBM1403 carriage control).
– SP m
Space m lines before printing.
– SK n
Skip-to-channel- n before printing.
XEROX DOCUPRINT 180 LPS PDL REFERENCE