SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
NUMBER
8-52
This parameter specifies page numbering control. It takes effect on
the next logical page boundary. The parameters are the same as
those for OUTPUT command.
NUMBER = option(s)
Syntax
Options
Table 8-39 lists the parameter option(s) and definition(s).
Table 8-43. NUMBER parameter option(s) and definition(s)
Option(s)
( pnum , lnum
, cnum [, findex ])
NO
Example
NUMBER=(1,1,40,1),END;
Definition(s)
This option has the following components:
•
pnum
Page number: specifies the starting number
(an integer) for page numbering. The
beginning page number may be non-
positive. The number is incremented at
page transitions but not printed until it goes
positive. The maximum page number that
will be printed is 2,147,483,647.
•
lnum
Line number: specifies an integer line
number on which the page number is to be
placed.
•
cnum
Column number: specifies an integer
ending column number for the page number
sequence.
•
findex
Font index: the list of fonts specified in the
FONTS parameter of the PDE command. If
not specified, the first font in the list is used.
•
NO
Specifies that no page numbering is to be
performed.
The default is NO.
XEROX DOCUPRINT 180 LPS PDL REFERENCE