Separators - Xerox 721P85530 Description

PRINT FORMAT COMMANDS

SEPARATORS

Option(s)
FIRST | LAST | (LAST,D) |
BOTH | (BOTH,D) | NONE
6-24
This parameter specifies that the printer software save an internal
copy of the first data page of the report and use it to generate
segment separator sheets.
EXPORT SEPARATORS = option(s)
Syntax
Options Table 6-19 lists the parameter option(s) and definition(s).
Table 6-19. SEPARATOR parameter option(s) and definition(s)
Definition(s)
This option has the following components:
•
FIRST
Specifies that a printer generated separator sheet be the first sheet of the
second and subsequent segments.
Note: The first segment begins with the first data page, so an additional
sheet is not generated.
•
LAST
Specifies that at least one copy of the saved data page should be generated
(on a separate sheet of paper) as a hard copy segment separator and
counted as the final sheet in the segment.
Note: In an online environment, a true banner trailer page, if encountered,
will be used to image any LAST separators of the final segment in place of
the saved data page.
•
BOTH
Specifies both FIRST and LAST, as above.
•
NONE
Specifies that no segment separator sheets be generated.
•
D
Specifies that the system prints the separator sheet on the back of any LAST
sheets. If the report is simplex, the system still processes the last page of
the segment as a duplex page. The parentheses are required when using
the D parameter option.
The default is NONE.
Example
SEPARATORS=(BOTH,D);
XEROX DOCUPRINT 180 LPS PDL REFERENCE