5�4�- Configuration Through Http Get Requests; 5�4�1�- Parameter Query - Circutor Wibeee Max Instruction Manual

Consumption analysers

Hide thumbs Also See for Wibeee Max:

Table of Contents

Wibeee Max

5.4.- CONFIGURATION THROUGH HTTP GET REQUESTS

Wibeee Max accepts HTTP GET requests for parameter and settings queries for the device.

Requests must be made directly to the IP address: 192.168.1.150 after connecting to the Wi-Fi

network created by the device.

All requests made to the Wibeee Max's internal server are GET requests and when they have

been processed by the server it sends an HTTP correct access response:

"HTTP 200 OK".

5�4�1�- PARAMETER QUERY

5�4�1�1�- DEVICE ID

You should use the following request to view the device's ID:

http://ip_address/services/user/devices.xml

Figure 33: HPPT queries: Device ID�

5�4�1�2�- Values of the device's variables

To view the values of all of the device's variables, use the following request:

http://ip_address/services/user/values.xml?id=device

It is also possible to view specific variables, see

with the available variables.

Table 12

http://ip_address/services/user/values.xml?var=device.variable

Instruction Manual

Table of Contents

Need help?

Do you have a question about the Wibeee Max and is the answer not in the manual?

Wibeee max plus