3�6�- Starting Up The Device; 3�6�1�- Application Mode - Circutor Wibeee Max Instruction Manual

3.6.- STARTING UP THE DEVICE
To start communication with the device it is necessary:
1�- To have access to the Internet through a wireless network.
2�- To check that the following ports are open:
- Port 8080 for Http Get / Post.
- Port 53 for DNS
- Port 80 for Internet
Note: The Orange Livebox Next router is incompatible with Wibeee Max devices when in
"WPA/WPA2" security mode and they do not connect. When in "only WPA2" mode they connect
correctly.
The Wibeee Max's data can be accessed in two ways:
 Application mode.
 Direct share mode.
3�6�1�- APPLICATION MODE
In application mode, the data measured by the Wibeee Max is uploaded to the cloud and ac-
cessed using the Wibeee CIRCUTOR application. When using this mode, the Wibeee Max and
the user who has configured it are linked, so the user can control the device, view the data that
has been sent and the charts and manage groups of devices.
To start the device in application mode, follow these steps:
1�- Scan the QR code to download the application or download it from:
http://wibeee�circutor�com
2�- Open the Wibeee CIRCUTOR application. And follow the steps that it indicates.
14
Wibeee Max
Instruction Manual