Xerox 4050 Message Manual page 91

XEROX DOCUPRINT IPS MESSAGES GUIDE
F164 Stacker jam, late departure from bin 2 sensor.
The paper did not leave bin 2 in time, causing a jam.
Action Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. (Refer to the Xerox DocuPrint 4850/4890 or 92C
IPS Troubleshooting Guide for the procedure.)
F166 Bin 1 is full.
Output bin 1 is full.
Action Remove the jobs contained in output bin 1 and press the [Continue]
button.
F167 Bin 2 is full.
Output bin 2 is full.
Action Remove the jobs contained in output bin 2 and press the [Continue]
button.
F168 Both stacker bins are full.
The stacker bins are both full.
Action Remove the jobs contained in the two stacker bins and press the
[Continue] button.
F171 Stitcher jam, late departure at stitcher sensor.
The paper did not leave the stitcher in time, causing a jam.
Action Clear the stitcher paper path, areas A and B. Discard any output in
the top tray and press the [Continue] button. (Refer to the Xerox
DocuPrint 4850/4890 or 92C IPS Troubleshooting Guide for the
procedure.)
F173 Stitcher cover open.
The stitcher top cover is open.
Action Close the stitcher cover, discard any purged output, and press the
[Continue] button.
F174 Stacker cover open.
The top cover of the stacker module is open.
Action Close the top cover of the stacker, discard any purged output, and
press the [Continue] button.
DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-19