Xerox 4050 Message Manual page 27

XEROX DOCUPRINT IPS MESSAGES GUIDE
03-471 EDN problem needs software reset.
A potential hardware or software problem detected on the EDN Core
board required a software reset.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-472 UIM needs software reset.
A potential noise problem detected on the UIM Core board required
a software reset.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-473 MIN needs software reset.
A potential hardware or software problem detected on the MIN Core
board required a software reset.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-474 PHN problem needs software reset.
The PHN Core board cannot communicate with any board on the
local bus.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-475 FSN1 problem needs software reset.
The FSN Core board 1 cannot communicate with any board on the
local bus.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-477 TMN problem needs software reset.
The TMN Core board cannot communicate with any board on the
local bus.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-480 Too many segments in the queue.
The job manager detected too many scheduling segments in the job
manager queue and initiated a cycle down of the printer.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
DOCUPRINT 96/4635/180 IPS MESSAGES
2-15