Xerox 4050 Message Manual page 67

XEROX DOCUPRINT IPS MESSAGES GUIDE
11-220-1 Stacker A ELV failed to leave home.
The elevator did not move from the original position.
Action Open the front doors of stacker A, check for any problems, close the
doors, and retry the operation.
11-220-2 Stacker B ELV failed to leave home.
The elevator did not move from the original position.
Action Open the front doors of stacker B, check for any problems, close the
doors, and retry the operation.
11-221-1 Stacker A failed to find home.
The elevator did not return to the original position.
Action Open the front doors of stacker A, check for any problems, close the
doors, and retry the operation.
11-222-2 Stacker B missing ELV encoder.
Encoder pulses were not received from the stacker elevator encoder
sensor while the elevator motor was activated.
Action Open the front doors of stacker B, check for any problems, close the
doors, and retry the operation.
11-223-1 Stacker A ELV failed to move in time.
Either the stacker elevator did not interrupt the stack height sensor in
time, or the stacker elevator did not arrive at the stacker elevator
down sensor in time.
Action Open the front doors of stacker A, check for any problems, close the
doors, and retry the operation.
11-223-2 Stacker B ELV failed to move in time.
Either the stacker elevator did not interrupt the stack height sensor in
time, or the stacker elevator did not arrive at the stacker elevator
down sensor in time.
Action Open the front doors of stacker B, check for any problems, close the
doors, and retry the operation.
11-224-1 Stacker A top cover open in print.
The top cover of stacker A is open while the system is attempting to
print.
Action Open the printer top cover and clear area 8. Open the inverter and
clear areas 15 and 16. Open stacker A and clear areas 17 and 18.
Close all of the covers and doors and retry the operation. (Refer to
the Xerox DocuPrint 96/4635/180 IPS Troubleshooting Guide for the
procedure.)
DOCUPRINT 96/4635/180 IPS MESSAGES
2-55