Download Print this page

Xerox 4050 Message Manual page 84

Xerox printer message guide
Hide thumbs Also See for 4050:

Advertisement

DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-12
E308
Toner waste container not present.
The dry ink waste container is not installed.
Action
Correctly install a dry ink waste container. (Refer to the Xerox
DocuPrint 4850/4890 or 92C IPS Guide to Performing Routine
Maintenance for the procedure.)
E309
Toner waste container full.
The dry ink waste container is full.
Action
Replace the dry ink waste container, making sure the new waste
container is installed correctly, and press the [Continue] button.
(Refer to the Xerox DocuPrint 4850/4890 or 92C IPS Guide to
Performing Routine Maintenance for the procedure.)
E315
Low black toner detected by toner sensor.
The black dry ink supply is low.
Action
Add black dry ink and retry the operation. (Refer to the Xerox
DocuPrint 4850/4890 or 92C IPS Guide to Performing Routine
Maintenance for the procedure.)
E316
Low color toner detected by toner sensor.
The colored dry ink supply is low.
Action
Replace the colored dry ink and retry the operation. (Refer to the
Xerox DocuPrint 4850/4890 or 92C IPS Guide to Performing Routine
Maintenance for the procedure.)
F004
CDM lost machine clock.
There is a problem with the machine clock sensor problem, a CDM
board failure, or a harness problem between the machine clock
sensor and the CDM.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
F005
MIR lost machine clock.
There is a problem with the machine clock that may be due to a CPM
or MIR board failure, or to a harness problem between the CPM and
MIR.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
F006
XER lost machine clock.
There is a CPM, MIR, or XER board failure. There may also be a
harness problem between the CPM and MIR, or the MIR and XER.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
XEROX DOCUPRINT IPS MESSAGES GUIDE

Advertisement

loading