Appendix 2 Accuracy - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 2
Accuracy of D/A conversion is determined by the accuracy of the maximum value of analog output value.
An output characteristic change through changes of the offset/gain setting or the output range does not sacrifice the accuracy,
which is maintained within the described range of the performance specifications.
The following graph shows the fluctuation range of accuracy when the range of -10 to 10V is selected.
The accuracy is 0.1% (10mV) at ambient temperature of 255; the accuracy is 0.3% (30mV) at ambient temperature of
0 to 55 (except for the conditions under noise influence).
V
10
0
-10
-32000
digit: Digital value
V: Analog output voltage (V)
(1): Fluctuation range
Accuracy
0 32000
(1)
digit
APPX
55

Appendix 2 Accuracy

A