Terms; Generic Terms And Abbreviations - Mitsubishi Electric MELSEC iQ-R Series User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
Buffer memory
Engineering tool
Global label
Module label
Offset/gain setting mode
User range
Watchdog timer error

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
D/A converter module
Factory default setting
Remote head module
Description
A memory in an intelligent function module for storing data (such as setting values and monitored values).
For a CPU module, it refers to a memory for storing data (such as setting values and monitored values of the
Ethernet function, data used for data communications of the multiple CPU system function).
A tool used for setting up programmable controllers, programming, debugging, and maintenance
A label that is valid for all the program data when multiple program data are created in the project.
The global label has two types: a module specific label (module label), which is generated automatically by GX
Works3, and an optional label, which can be created for any specified device.
A label that represents one of memory areas (I/O signals and buffer memory areas) specific to each module in a
given character string.
For the module used, GX Works3 automatically generates this label, which can be used as a global label.
This mode is for configuring the offset/gain setting.
An analog output range where any value can be set. This range can be set in the offset/gain setting.
An error that occurs if the internal processing of the module is abnormal. Watchdog timer enables the module to
monitor its own internal processing.
Description
The abbreviation for the MELSEC iQ-R series high speed digital-analog converter module
A generic term for analog output ranges of 4 to 20mA, 0 to 20mA, 1 to 5V, 0 to 5V, -10 to 10V
The abbreviation for the RJ72GF15-T2 CC-Link IE Field Network remote head module
13