Mitsubishi Electric MELSEC iQ-R Series User Manual page 48

■Wave output start processing program example
This example shows a program for starting the CH1 wave output.
(659)Turns on 'CH1 Output enable/disable flag' (Y1).
(682)Turns on the wave data output start/stop request (X18) and sets the wave output start/stop request (D30) to the wave output start request (1).
(686)When stopping the wave output, turns off the wave data output start/stop request (X18) and sets the wave output start/stop request (D30) to the wave
output stop request (0).
(690)Turns on the wave output start/stop request function block start flag (M30), then starts or stops the wave output.
7 OPERATION EXAMPLES
46
7.3 Program Example (for Wave Output Mode)