Mitsubishi Electric MELSEC iQ-R Series User Manual page 44

Label settings
GX Works3 provides functions that support the creation of a program.
The following table lists the module labels and global labels used for the program examples in this section.
There is no need to change the settings of the module labels. For details on the global labels, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
Classification Label name
Module label R60DAH_1.bModuleREADY
R60DAH_1.bExternalPowerSupplyREADY_Flag
R60DAH_1.bOperatingConditionSettingCompletedFlag
R60DAH_1.bCH1OutputEnableDisableFlag
R60DAH_1.bOperatingConditionSettingRequest
R60DAH_1.stnControl_D[0].uWaveOutputStartStopRequest_D
R60DAH_1.stnSetting_D[0].uD_A_conversionEnableDisableSetti
ng_D
Labels to be Define global labels as shown below:
defined
7 OPERATION EXAMPLES
42
7.3 Program Example (for Wave Output Mode)
Description
Module READY
External power supply READY flag
Operating condition setting completed flag
CH1 Output enable/disable flag
Operating condition setting request
CH1 Wave output start/stop request
CH1 D/A conversion enable/disable
setting
Device
X0
X7
X9
Y1
Y9
U0\G462
U0\G500