Mitsubishi Electric MELSEC iQ-R Series User Manual page 40

4.
Add the D/A converter module with the window set as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
5.
Set the window as follows to add the module label of the D/A converter module.
6.
Set "Basic setting" of "Module Parameter" of the D/A converter module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [R60DAH4]  [Module Parameter]  [Basic setting]
7 OPERATION EXAMPLES
38
7.3 Program Example (for Wave Output Mode)