Chapter 4:Connecting the Emulator to a Target System
Selecting a clock module
Selecting a clock module
If you can, use the clock circuitry from your target system to clock the emulator.
Before turning on the emulator, ensure you have the appropriate clock module
installed in the emulator probe. The emulator probe is shipped from HP with Clock
Module 64780-66509 installed. This configures the emulator for operation with a
target system containing an oscillator. If a crystal circuit is used in your target
system instead of an oscillator, remove Clock Module 64780-66509 from the
emulation probe and install Target Crystal Clock Module B of the HP 64780-66507
in its place.
60