Table of Contents
Advertisement
Chapter 5: Installing/Updating Emulator Firmware
Updating the firmware using a PC
FILES=20 allows 20 files to be accessed concurrently. This number must be at
LEAST 20 to allow the firmware update utility to operate properly.
5 Edit the AUTOEXEC.BAT file to add:
C:\HP64700\BIN (to the end of the PATH variable)
SET HPTABLES=C:\HP64700\TABLES (as a new line)
SET HPBIN=C:\HP64700\BIN (as a new line)
Part of an example AUTOEXEC.BAT file resembles:
ECHO OFF
SET HPTABLES=C:\HP64700\TABLES
PATH=C:\DOS;C:\HP64700\BIN
6 The default C:\HP64700\TABLES\64700TAB file contains entries to establish
communications connections for COM1 and COM2. The content of this file is:
EMUL_COM1 unknown COM1 OFF 9600 NONE ON 1 8
EMUL_COM2 unknown COM2 OFF 9600 NONE ON 1 8
7 You can edit this file to identify your emulator, if desired:
EMUL_COM1 m68360
EMUL_COM2 unknown COM2 OFF 9600 NONE ON 1 8
8 If you are using the COM3 or COM4 port to update your firmware, you need to
edit the C:\HP64700\TABLES\64700TAB file. Either add another line or modify
one of the existing lines. For example:
EMUL_COM3 m68360
EMUL_COM4 unknown COM4 OFF 9600 NONE ON 1 8
Software installation is now complete. Reboot the PC to enable the changes made
to the CONFIG.SYS and AUTOEXEC.BAT files. To reboot, press the
<CTRL><ALT><DEL> keys simultaneously.
104
COM1 OFF 9600 NONE ON 1 8
COM3 OFF 9600 NONE ON 1 8
Advertisement
Table of Contents
