Table of Contents
Advertisement
Chapter 1: Preparing the Emulator
Preparing the Emulator
This chapter shows you how to install the emulation and analysis hardware in the
emulator card cage.
The installation tasks are described in the following steps:
4
1 Install optional memory modules on the deep analyzer card, if desired.
2 Connect the HP 64780A emulator probe to the HP 64748C emulator control
card.
3 Install cards into the HP 64700 card cage.
4 Install emulation memory modules on the emulator probe.
5 Connect a power cord to the HP 64700 Card Cage.
Advertisement
Table of Contents
