Communication Board Accessories - Eaton COOPER POWER Series M Installation And Operation Instructions

SPEAR™ Single-Phase Recloser System
Radio mounting tray
The SPEAR single-phase control can be equipped with
the wireless communications provisions package (Catalog
Number KSPRC-1774-29). This accessory comes with the
13.5 VDC interface board and also the radio mounting tray.
The radio tray is shown which is mounted on the interior
right side cabinet wall (Figure 26). Below is a list of the
supported radios. If your radio is not listed, contact factory
to evaluate other radio mounting options.
GE MDS TRANSNET 900
● ●
GE MDS MERCURY 3650
1.13
● ●
LIFTING LUG
GE MDS INET II
● ●
GE MDS SD9
● ●
Sierra Wireless Raven X
● ●
Sierra Wireless Raven XT
● ●
BlueTree BT-6601
● ●
LATCHES WITH
CalAmp Viper 900
PADLOCK
● ●
PROVISIONS
Telemetric DNP-RTM
● ●
Lantronix WiBox
● ●
Phoenix Contact RAD-80211-XD (din rail)
● ●
ELPRO 905U-E
● ●
Microhard IP921
● ●
Landis & Gyr GridStream (IV Series)
● ●
S&C SpeedNet
● ●
POWER SUPPLY
INPUT RECEPTACLE
FOR RADIO
ANTENNA
RECEPTACLES
BATTERY
Figure 26 . Radio mounting tray (example radio
mounted) mounted on right-side interior cabinet wall
30
INSTALLATION AND OPERATION INSTRUCTIONS MN280048EN June 2016
11.75
10.63
9.84
RIGHT SIDE VIEW
FRONT VIEW
(WITH CONTROL AND DOOR
REMOVED FOR CLARITY)

Communication board accessories

The SPEAR single-phase recloser control is equipped
with one communication accessory expansion bay
offering versatile support for modern communication
media (Figure 27). One distinct communication option
(Figure 28) is available, providing two-way, real time digital
communications with a remote terminal unit (RTU), short
or long-range radio, or other communication devices with
DNP3 support. The following option is available: RS-232
(Isolated) Serial communication card.
The communication accessory expansion bay concept offers
high versatility with respect to communication medium
and protocol support. Additional accessories are being
continuously developed. Contact your Eaton representative
for the latest information regarding particular media and
communication protocol support.
RS-232 serial communication card
The RS-232 Serial communication card accessory provides
means for establishing asynchronous link-based digital
communications with the SPEAR single-phase recloser
MOUNTING
CHANNELS
control. The Galvanic isolated (1000 VDC) RS-232 port can
operate at communication speeds up to 256 kbps. The
accessory also includes TX and RX indicating LEDs for
verifying communications.
Digital communications must be programmed to ensure
proper operation of the RS-232 communication card
accessory. Refer to MN280012EN SPEAR Single-Phase
Control Programming Guide for additional protocol support
information.
Table 15 indicates the pin assignments for the side panel
1.12
RS-232 communication port (Figure 27). Refer to Figure 30
for pin identification.
CONTROL MODULE
Figure 27 . SPEAR single-phase recloser control side
panel communication ports
PROVISIONS FOR
UP TO 5/8" MOUNTING
HARDWARE
BACK VIEW
OPTIONAL RS-232
COMMUNICATION
PORT
MODULE SIDE VIEW
GROUND LUG FOR
#4 TO #14 SOLID OR
STRANDED WIRE
CONTACT I/O
MODULE
SHIELD WIRE
CONNECTION