5. PT Communication Features
Table 5. Information Stored.
Event Code and Time-
Event Cause and Time-stamp
stamp
Status: Primary, Secondary
Alarm Snapshot or Trip
Current: IA, IB, IC, IN, IG
Snapshot
Temperature
Operations Count
User Waveform or
Waveform of: IA, IB, IC, IN, IG
Alarm Waveform
1 Cycle (64 Data Points)
Trip Waveform
Waveform: IA, IB, IC, IN, IG
10 Cycles (6400 Data Points)
10
PT 10 TrIP UnIT User ManUal Power TrIP (PT) UnITs MN013021EN January 2024 www.eaton.com
5. PT Communication Features
5.1 USB Port
The PT includes a micro-B USB port on the front of the
trip unit. This USB connection may be used in conjunction
with the Power Trip Managerment (PTM) software to
configure, control, and test the trip unit.
The USB can be used to supply power to the trip unit,
change and save relevant settings.
Figure 13. PT 10 Connection with Computer