Replacing The Waste Toner Container - Xerox Phaser 6110MFP User Manual

Replacing the waste toner container

The life of the waste toner container unit is approximately 1,250 pages
for full color 5% image printing or 5,000 images for black printing. When
the life span of the waste toner container has expired, Replace/Install
Waste Toner Tank appears on the display of the control panel,
indicating the waste toner container needs to be replaced. Otherwise
your printer stops printing.
To replace the waste toner container:
1 Turn the machine off, then wait a few minutes for the machine to
cool.
2 Open the front cover.
3 Pull the waste toner container out of the machine using its handle.
Tip
Make sure that you lay the waste toner container on a flat
surface so that the toner does not spill.
4 Remove the container's cap from the container as shown below,
and use it to close the waste toner container opening.
Caution
Do not tilt or turn the tank over.
5 Take a new waste toner container out of its package.
6 Insert the new container into position and then push it to make sure
that it is firmly seated in place.
7 Close the front cover firmly.
Caution
If the front cover is not completely closed, the machine will not
operate.
8 Turn the machine on.
Tip
After rebooting, your machine will automatically reset the
counter for the waste toner container.
9.8
<Maintenance>