Siemens SINAMICS G110M Manual page 52

6 Configuration and Settings
6.1 Creating the project configuration
No. Action
21. Select the desired HMI
operator panel:
In the "Devices &
1.
networks" editor, go to
the "Network view".
2. Then drag the required
HMI KTP600 from the
catalog into the graphic
area.
The HMI KTP600 is available
in the catalog at...
>HMI
>SIMATIC Basic Panels
>6'' Display
22. Connect the HMI operator
panel to the SIMATIC
controller:
1. Activate connection
mode and from the drop-
down list, select "HMI
connection".
2. Create a connection
graphically between the
Ethernet connections of
the HMI KTP600 and the
PLC by dragging the
mouse.
23. Show the addresses.
The drive automatically
contains the next free IP
address.
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4,
Add and network the HMI KTP600
07/2018
Remarks
1
1
2
2
52