Siemens SINAMICS G110M Manual page 47

6 Configuration and Settings
6.1 Creating the project configuration
No. Action
7. In the device configuration
you go to the SIMATIC CPU.
8. Configure the PROFINET
interface:
1. In the device
configuration you open
the "Properties" of the
SIMATIC CPU.
Go to "Ethernet
2.
addresses" in the
navigation tree.
Select "Set IP address in
3.
the project" and enter the
desired IP address.
9. Enable the use of the system
memory bits, since they are
used in the control program
(MB1).
1. In the tree you go to
"System and clock
memory".
Checkmark "Enable the
2.
use of system memory
byte" and enter the
desired byte address.
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4,
Configuring the SIMATIC S7-1200
07/2018
Remarks
1
2
1
The program in the application example
uses MB1 (default setting)
3
2
47