Rack Mounting The Quantum Processor - Extron electronics Quantum Elite Series User Manual

Videowall processing systems
Table of Contents

Advertisement

Rack Mounting the Quantum Processor

The Quantum processor can be placed on a tabletop or mounted in a rack
(recommended).
CAUTION: The Quantum processor is very heavy. When it is fully populated with
input and output cards, its weight can be:
Quantum Elite 615: Up to 61 lbs (27.5 kg)
Quantum Elite 408 and Quantum Connect: Up to 38.6 lbs (17.5 kg).
It is strongly recommended that you seek assistance with lifting or moving the unit.
ATTENTION :
équipé de cartes d'entrée et de sortie, son poids peut être :
Quantum Elite 615 : jusque 27,5 kg (61 lbs)
Quantum Elite 408 et Quantum Connect : jusque 17,5 kg (38.6 lbs).
Il est fortement recommandé que vous soyez assisté lorsque vous soulevez ou que
vous déplacez l'unité.
Rack Mounting Requirements for Quantum
In addition to the UL guidelines (see
page), observe the following when mounting the processor:
Support
Always use additional support at the sides or rear of the Quantum unit, attached to both
the front and rear rack posts. Ensure that the shelf or other mounting accessories can
support the full weight of the unit.
ATTENTION:
Do not rely on the processor mounting flanges to support the full weight of the
unit. These must be used only to secure the unit within the rack.
Ne comptez pas sur les oreilles de rackage du processeur pour soutenir tout le
poids de l'appareil. Celles-ci doivent seulement être utilisées pour bloquer l'unité
à l'intérieur du rack.
Do not stand other units directly on top of the processor when it is rack mounted
because this can overload the mountings.
N'installez pas d'autres produits directement au-dessus du processeur lorsque
celui-ci est monté en rack : cela risquerait de surcharger les éléments de
montage.
Ventilation
Ensure that sufficient airflow is provided to satisfy the ventilation requirements of all items
of equipment installed in the rack.
A ventilation gap of at least 4 inches (10 cm) must be left between the front and rear
panels of the Quantum and adjacent surfaces or equipment.
Le processeur Quantum est très lourd. Lorsqu'il est entièrement
UL Guidelines for Rack Mounting
Quantum Series Videowall Processing Systems • Reference Information
on the previous
79
79

Advertisement

Table of Contents
loading

Table of Contents