Figure 3-17 Connecting The Gsm Communications Cable To The Figure 3-18 Ac Input And Output Wiring To A Single Inverter - Xantrex SW Plus 2524 Owner's Manual

976-0043-01-02
WARNING: Shock Hazard
Auto-start generators can start automatically at any time.
Affix the warning label (supplied with the GSM) regarding auto-start generators
on or near the main AC distribution panel and near the generator. This will
remind the operator that AC power may still be supplied from the generator and
additional steps may be required to make the panel and the generator safe.
See the GSM Installation Guide
for wiring instructions
The RJ11 Communications Cable
provided with the GSM connects to
the GEN Port on the inverter
AC end of the Inverter
Figure 3-17 Connecting the GSM Communications Cable to the
Wave Plus
AC Wiring
Generator Start Module
Sine
3–31