Using The Air Compressor; Over-Temperature Safety Protection - Xantrex XPower 400R Owner's Manual

Operation

Using the Air Compressor

WARNING: Fire hazard
The compressor is designed for short term operation only.
Operating the compressor over an extended period of time will
cause the compressor unit to overheat, which could lead to fire.
Allow the compressor to cool down for 10 minutes after each 10
minutes of continuous operation.
WARNING: Fire hazard
Do not leave the compressor unattended while in operation. Keep
out of reach of children.
WARNING: Risk of personal injury or
damage to equipment
Never leave the compressor unattended while in operation. The
compressor is capable of inflating to 250 PSI. Do not exceed the
recommended pressure of either the compressor or the object being
inflated. If either recommended pressure is exceeded, an explosion
may result.

Over-Temperature Safety Protection

It is recommended that you follow the warnings and turn the
compressor
operation. However, the XPower Powerpack is equipped with
an over-temperature safety protection feature that
automatically turns the compressor off if it begins to
overheat. Once the compressor cools down to its normal
operating temperature it will automatically turn on again and
continue inflating. You should turn the compressor off at the
power switch if this safety feature engages, and allow the
compressor to cool for 15 minutes before re-starting.
3-12
for 10 minutes after every 10 minutes of
OFF
975-0162-01-01