Inflating Small Sports Equipment - Xantrex XPower 400R Owner's Manual

Operation
CAUTION
If the pressure gauge on the compressor indicates more than twice
the recommended pressure for the object you are inflating, and you
have only started to inflate the object, the valve connector is
incorrectly connected to the valve stem. This may damage the
XPower Powerpack. Remove and reattach the valve connector to
the valve stem.
To inflate your vehicle, motorcycle, or bicycle tires:
1. Place the valve connector securely on the tire valve stem,
push it as far as possible to allow normal airflow, and
close the thumb latch. If necessary, use a supplied nozzle
adapter.
2. Turn the compressor on, and inflate your tire to the
pressure specified by its manufacturer. Use Table 3-3,
"Pressure Specifications for Common Items" on page 3–
13 as a general guide only.
3. Turn the compressor
reached.
4. Open the thumb latch and remove the valve connector
from the valve stem.
5. Check air pressure with a pressure gauge.
Note
:
relieve pressure on the internal mechanisms.

Inflating Small Sports Equipment

You can use the compressor to inflate small sports equipment
such as balls (soccer balls and footballs).
3-14
Leave the thumb latch in the open position for storing to
after appropriate pressure is
OFF
975-0162-01-01