Xantrex XPower 400R Owner's Manual page 60

Troubleshooting
Table 5-1 Troubleshooting reference
Problem Possible Cause
The engine XPower Powerpack
being jump- battery is not fully
started will not charged.
start.
The engine condition
is poor.
External fuse (250 A)
is blown.
The engine start
capacity exceeds the
XPower Powerpack
jump-start capability.
The battery External fuse (250 A)
clamps of the is blown.
jump-start
cables measure
zero volts.
The light does Light bulb has burnt
not turn on. out.
The AM radio The XPower
does not work Powerpack AC outlets
or buzzes are being used,
continuously causing interference.
(XPower
Powerpack
400R only).
5-6
Solution
Recharge the XPower Powerpack
battery.
Have the engine serviced.
Replace 250 A, 32 V fuse with same
type and ratings.
Replace 250 A, 32 V fuse with same
type and ratings.
Remove lens cover and replace bulb
with one of the same type and rating.
Turn off the AC outlets.
975-0162-01-01