Recharging With A Generator's Regulated 12 V Dc Outlet - Xantrex XPower 400R Owner's Manual

Xantrex xpower powerpack owner's guide 400 plus, 400r
Hide thumbs Also See for XPower 400R:
Table of Contents

Advertisement

Recharging with a Generator's Regulated 12 V DC
Outlet
WARNING: Fire and explosion hazard
The generator output must be intended for battery charging and
have an output of 15 V or less. An unregulated output or one that
exceeds 15 V DC can damage the battery.
This may lead to accumulations of hydrogen, causing exposure to
fire and explosion hazard.
Refer to the Owner's Guide accompanying your generator for
detailed instructions on connecting the generator to a unit like
the XPower Powerpack.
You can recharge the battery of the XPower Powerpack using
a generator in several ways:
Using the AC Charger to recharge the XPower
Powerpack from a generator is possible, but would
require extended generator running time.
Using a generator which has an auxiliary regulated 12 V
DC output designed for charging 12 V batteries. Most
generators are equipped with them. Use this power
source for faster charging.
Using a generator with a regulated 12 V DC lighter
socket. Follow the connection instructions in
"Recharging with the DC Charging Cable" on page 4–3.
Most of the XPower Powerpack's battery capacity will be
recharged in a few hours.
Note
:
XPower Powerpack has been disconnected from all appliances
and all charging sources for fifteen minutes.
975-0162-01-01
Recharging the XPower Powerpack Battery
Battery Charge (%) indicator is only accurate when the
4-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xpower 400 plus

Table of Contents