Xantrex XPower 400R Owner's Manual page 59

Table 5-1 Troubleshooting reference
Problem Possible Cause
Green The voltage at the AC
Charging wall outlet is less than
Status light is 120 V AC.
still flashing
and hasn't Internal battery is
changed to permanently damaged.
steady after 50
hours of
charging.
The The valve connector
compressor may not be securely
runs but won't placed on the valve
inflate. stem.
The item being
inflated may have a
leak.
The The compressor may
compressor have overheated from
runs slowly. excessive use.
Battery voltage is too
low.
975-0162-01-01
Troubleshooting Reference
Solution
Use AC wall outlet that supplies
120 V AC.
Replace the battery.
Check that the valve connector is
securely placed on the valve stem
before closing the thumb latch.
Check that the item being inflated
has no leaks.
Check the compressor hose for any
breaks or leaks at connections.
Turn off the compressor and let it
cool down.
Check the condition of the internal
battery. The battery may need to be
recharged or replaced.
5-5