Using The Air Compressor; Over-Temperature Safety Protection - Xantrex XPower Powerpack 300 Owner's Manual

Using the Air Compressor

Using the Air Compressor
WARNING: Fire hazard
The compressor is designed for short term operation only.
Operating the compressor over an extended period of time will
cause the compressor unit to overheat which could lead to fire.
Allow the compressor to cool down for 10 minutes after each
10 minutes of continuous operation.
WARNING: Risk of personal injury or
damage to equipment
Never leave the compressor unattended while in operation. Keep
out of reach of children. The compressor is capable of inflating to
250 PSI. Do not exceed the recommended pressure of either the
compressor or the object being inflated. If either recommended
pressure is exceeded, an explosion may result.
WARNING: Risk of personal injury or
damage to equipment
Never leave the compressor unattended after it has switched itself
off due to overheating. It will turn on again and continue inflating
when its internal temperature drops.
Turn the compressor off at the power switch after each use or any
time the compressor turns off automatically.

Over-temperature Safety Protection

It is recommended that you follow the warnings and turn the
compressor off for 10 minutes after every 10 minutes of
operation. However, the XPower Powerpack 300 is equipped
with an over-temperature safety protection feature that
automatically turns the compressor off if it begins to
overheat. Once the compressor cools down to its normal
operating temperature it will automatically turn on again and
continue inflating. You should turn the compressor off at the
power switch if this safety feature engages, and allow the
compressor to cool for 15 minutes before restarting.
22