Xantrex XPower 400R Owner's Manual page 19

Feature
5
6
7
8
Not
shown
Control Panel Operation
Required
How to... Condition
Monitor total Inverter's
AC power switch is turned
consumed by Output Power (W)
the light illuminates
applications (green);
powered from AC charger is
the unplugged from the
Powerpack's 2 wall AC outlet.
AC outlets
975-0162-01-01
Description
Charging Status light illuminates when the
XPower Powerpack
(i.e. AC Charger is connected to the inverter's
Charger Input Socket and plugged into the
household 120 V AC outlet).
Battery Charge % light illuminates (green) when
Battery Charge information is displayed on the
Digital Display.
Output Power (W) light illuminates (green) when
Output Power information is displayed on the
Digital Display.
Display Function button, when pressed, allows for
reading Battery Charge status on the Digital
Display. Toggles Digital Display's power
Audible Alarm (inside the unit) sounds in the event
of overheating or low battery protection on inverter.
Required Action
/ No action required.
ON OFF
; The Digital Display
ON
will show the AC
power drawn from the
inverter by the
applications powered
from the Powerpack's
AC outlets.
XPower Powerpack Features
is in Charging Status mode
Note
In order to save the
battery power and
ensure longer inverter
run time, press Display
Function button to turn
off the Digital Display.
Press Display Function
button again to turn the
display on for AC
power reading.
/ .
ON OFF
2-3