Xantrex XPower 400R Owner's Manual page 20

Features
Required
How to... Condition
Monitor Inverter's
Battery switch is turned to
Charging
OFF
status All appliances must be
disconnected from the
AC and DC power
outlets;
The
the incandescent light
must be turned to
The AC charger must
be plugged into the
Powerpack's Charger
Input Socket and also
in to a household AC
outlet.
Check Battery Inverter's
Charge status switch is turned to
OFF
All appliances must be
disconnected from the
AC and DC power
outlets;
The
the incandescent light
must be turned to
The AC charger must
not be plugged into
the Powerpack's
Charger Input Socket.
2-4
Required Action
/ No action required.
ON OFF
; A flashing green
Charging Status
light indicates that the
Powerpack's battery
needs recharging and
/ switch of that the AC charger is
ON OFF
charging the battery.
;
OFF
A steady green
Charging Status
light indicates that the
Powerpack's battery
is fully charged and
the Powerpack is
ready for use.
/ Push and hold the
ON OFF
Display Function
; button.
The green Battery
Charge (%) light will
come on and the
/ switch of Digital Display will
ON OFF
show the remaining
; battery capacity in %.
OFF
Note
Recharging with the
supplied AC charger is
a true "plug-in-and-
forget" charging
method.
We recommend leaving
the AC charger
connected when the
Powerpack is not in use
to permanently
maintain the battery in
fully charged condition.
This function is
disabled when the AC
charger is plugged in to
the Charger Input
Socket, or when the
inverter main switch is
.
ON
For accurate Battery
Charge reading, allow
15 minutes between
charging/use and
battery capacity check.
975-0162-01-01