Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 0; Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1 - Extron electronics MTPX Plus Series Setup Manual

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 0

NOTES:
If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.
•
• If the switcher in Lock mode 2, this procedure selects mode 0 (unlocks the
switcher).
Toggle the lock on and off by pressing and holding the ENTER button, the VIDEO button,
and the AUDIO button simultaneously for approximately 2 seconds.
Press and hold simultaneously.
ENTER
2 seconds
ENTER
The buttons blink twice.
Release the buttons.

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 1

NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.
• If the switcher in Lock mode 2, this procedure selects mode 0 (unlocks the
switcher).
Toggle the lock on and off by pressing and holding the VIDEO button and the AUDIO button
simultaneously for approximately 2 seconds.
Press and hold
simultaneously.
I / O
VIDEO AUDIO
2 seconds
I / O
VIDEO AUDIO
The buttons blink twice.
Release the buttons.
I / O
VIDEO AUDIO
I / O
VIDEO AUDIO
MTPX Plus Series Setup Guide • Front Panel Operation 11