Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 0; Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1 - Extron electronics DTP CrossPoint 4K Series Setup Manual

Selecting Lock Mode 2 or Toggling between Mode 2 and
Mode 0
NOTES:
If the switcher is in Lock mode 0 or mode 1, this procedure
•
selects mode 2. The
twice.
If the switcher is in Lock mode 2, this procedure selects
•
mode 0 (unlocks the switcher). The
buttons blink twice.
Toggle the lock on or off by pressing and holding the
, and
Video Audio
(approximately 2 seconds).
Lock mode 2
CONTROL
ENTER PRESET VIEW
Press and hold for 2 seconds.
Lock mode 0
CONTROL
ENTER PRESET VIEW
Press and hold for 2 seconds.
Selecting Lock Mode 2 or Toggling between Mode 2 and
Mode 1
NOTES:
If the switcher is in Lock mode 0 or mode 1, this procedure
•
selects mode 2. The
twice.
If the switcher is in Lock mode 2, this procedure selects
•
mode 1. The
Toggle the lock on and off by pressing and holding the
button and the
2 seconds.
Lock mode 1
I/O
VIDEO AUDIO VIDEO
Press and hold
for 2 seconds.
,
Esc Video
buttons simultaneously until the buttons blink
I/O
ESC VIDEO AUDIO
I/O
ESC VIDEO AUDIO
,
Esc Video
and
Video Audio
button simultaneously for approximately
Audio
Lock mode 2
I/O I/O
AUDIO VIDEO AUDIO
Press and hold
for 2 seconds.
DTP CrossPoint 4K Series • Front Panel Operations
, and buttons blink
Audio
and
Video Audio
Enter
I/O
VIDEO AUDIO
CONTROL
ENTER PRESET VIEW ESC VIDEO
, and buttons blink
Audio
buttons blink twice.
CONTROL
ENTER PRESET VIEW ESC
,
I/O
AUDIO
Video
I/O
VIDEO AUDIO
21