Master Bilt MCR-33101 Installation & Operation Instructions page 42

A10 – Continuous Deep Freezing
Operate as indicated to start the cycle:
1 Make sure the device is in the "ON" status.
2 Make sure that the keyboard is not locked and that
no procedure is in progress.
3 Press and release the key (1), press and release the
key (2) and then press and release the key (3)
twice. The device will display the work set-point
during deep freezing.
4 Press and release the MENU key and then press
and release the UP key or the DOWN key to select
the work setpoint during deep freezing.
4.1 Press and release the (+) key or the (-) key to
modify this value and then the ESCAPE key to
memories it; this value can also be memorized
through parameter r8 setpoint.
5 Press and release the START/STOP key (1): the
cycle will be started.
During deep freezing the device displays the temperature of the cabinet, the program name (if named)
and the time passed since the start of deep freezing.
6 The cycle can be stopped at any time by pressing and releasing the START/STOP key.
42