Master Bilt MCR MCR-33-101 Specifications

MCR-33-101
FEATURES FEATURES
CONSTRUCTION
• Stainless steel interior and exterior
with polyurethane foamed-in-place
insulation
• Interior light
• Door gasket heater
• High velocity forced air convection
through evaporator coil
• HACCP compliant recording ther-
mometer for blast chiller ambient
air temperature (requires printer to
have record)
• 4 food temperature probes with se-
quential readout display in MCR-33-
101, 8 probes in MCR-33-102
• Automatic chill cycle control with
food temperature probes
DOORS
• Door dimensions: 30" x 78"
• Flush mounted
• 36" high 16 ga. stainless steel kick-
plate on door exterior
REFRIGERATION SYSTEM
• An air- or water-cooled condensing
unit will be supplied depending on
application.
Full-length
evaporator coil
and vertical fan
tower provide
evenly distributed
cooling.
CONTROL PANEL
• HACCP compliant recording features
• Surface mounted on exterior of blast
chiller
• On/off switch
• Digital readout of interior ambient
temperature
• Digital cycle timer
• Microprocessor control system
enclosed in easily accessible box
• Automatic air defrost cycle
• Automatic hold cycle
• Audible alarm at end of chilling cycle
RACK
• Racks provided:
– MCR-33-101 .............................. 1
– MCR-33-102 .............................. 2
• Stainless steel construction
• Accomodates 26 pans, 12" x 20" x
2 / ", two per each of 13 ledges
1
2
• Ledges on 4
1
• Each pan holds up to 10 pounds of
food for total rack quantity of 260 lbs.
• Rack dimensions: 24
deep x 68 /
5
16
• Rack mounted on heavy-duty swivel
casters
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
ITEM NO. __________________________________________________
PROJECT __________________________________________________
LOCATION _________________________________________________
DATE _________________________ QTY. _______________________
MCR-33-101 &
MCR-33-102 SERIES
Roll-in & Pass-Thru
Blast Chillers
ROLL-IN MODELS
❑
MCR-33-101
❑
MCR-33-102
/ " spacing
2
/ " wide x 27"
1
2
" high
PASS-THRU MODELS
❑
MCR-33-101PT
❑
MCR-33-102PT
COOLING TIME
• Maximum load of 260 pounds of
food requires approximately 90 min-
utes per cooling cycle depending on
food density and input temperature
of food
WARRANTY
• Standard limited one year extended
compressor (optional four year ex-
tended warranty available), one year
limited parts, limited 10 year panel
OPTIONS
❑ Optional finishes
❑ Add suffix "C" for correctional
model
❑ Printer package
❑ Extended four year compressor
warranty