Table of Contents
Advertisement
A8 – Time-controlled Deep Freezing and Storage
The time-controlled deep freezing and storage cycle is divided into the following two phases:
- Deep freezing
- Storage.
Operate as indicated to start the cycle:
1. Make sure the device is in the "ON" status.
2. Make sure that the keyboard is not locked and that no
procedure is in progress.
3. Press and release the key (1), press and release the
key (2) and then press and release the key (3). The
device will display the duration of deep freezing and
the work set-point during deep-freezing.
4. Press and release the MENU key and then press and
release the UP key or the DOWN key to select the
deep freezing duration and the work set-point during
deep freezing.
4.1 Press and release the (+) key or the (-) key to modify
these values and then the ESCAPE key to memories
them; these values can also be memorized through
parameters r2 and r8 setpoint.
5. Press and release the START/STOP key (1): the cycle
will be started.
During blast chilling the device displays the residual deep freezing time, the temperature of the cabinet,
the name of the program (if named) and the time passed from the start of deep freezing.
6. The cycle can be stopped at any time by pressing and releasing the START/STOP key.
When the time expired deep freezing duration, the
device automatically passes to storage mode and the
buzzer is activated for the time period established with
parameter AA to indicate that the cycle has been
completed.
Press and release a key to silence the buzzer.
40
Hide quick links:
Advertisement
Table of Contents
