Master Bilt MCR-33101 Installation & Operation Instructions page 35

A4 – Time-controlled hard blast chilling & storage
The time-controlled hard blast chilling and storage cycle is divided into the following three phases:
- Blast chilling hard phase
- Blast chilling
- Storage.
Operate as indicated to start the cycle:
1. Make sure the device is in the "ON" and HOME
status.
2. Make sure that the keyboard is not locked and that no
procedure is in progress.
3. Press and release the key (1), press and release the
key (2), and then press and release the key (3); the
device will display the blast chilling duration and the
work set-point during blast chilling.
4. Press and release the MENU key and then press and
release the UP key or the DOWN key to select the
blast chilling duration and the work set-point during
blast chilling.
4.1 Press and release the (+) key or the (-) key to modify
these values and then the ESCAPE key to memories
them; these values can also be memorized through
parameters r1 and r7.
5. Press and release the START/STOP key (1): the
cycle will be started.
During hard blast chilling the device displays the residual blast chilling time, the temperature of the
cabinet, the name of the program (if named) and the time passed from the start of blast chilling.
6. The cycle can be stopped at any time by pressing and releasing the START/STOP key (1).
When the time expired for the blast chilling duration, the
device automatically passes to storage mode and the
buzzer is activated to indicate the time cycle has been
completed.
35