Master Bilt MCR-33101 Installation & Operation Instructions page 36

A5 – Continuous blast chilling
Operate as indicated to start the cycle:
7. Make sure the device is in the "ON" HOME status.
8. Make sure that the keyboard is not locked and that no
procedure is in progress.
9. Press and release the key (1), press and release the
key (2) and then press and release the key (3) twice.
The device will display the work set-point during
blast chilling.
10. Press and release the MENU key and then press and
release the UP key or the DOWN key to select the
work setpoint during blast chilling.
10.1 Press and release the (+) key or the (-) key to
modify this value and then the ESCAPE key to
memories it; this value can also be memorized
through parameters r1 and r7.
11. Press and release the START/STOP key (1): the cycle
will be started.
During blast chilling the device displays the temperature of the cabinet, the program name (if named)
and the time passed since the start of blast chilling.
12. The cycle can be stopped at any time by pressing and releasing the START/STOP key (1).
36