Example 2: Radarpulseddoppler_Andee_Rgb - Infineon XMC4700 Setup Manual

Using Infineon's radar baseboard XMC4700 and BGT24LTR11 radar
shield with Arduino
Set-up guide Software set-up
Upload the code onto the board by clicking the "Upload" button (Figure 22).
6.
Figure 22 Uploading code onto board
The application can now be tested. Make some movements in front of the radar board and observe the LED
colors depending on the motion and its direction (Figure 23).
Table 5 LED color based on motion for Example 1
LED color
Off
Red
Green
Blue
Figure 23 Observe LED color change with motion
3.4.2

Example 2: RadarPulsedDoppler_Andee_RGB

This section lists the steps to follow to get this example up and running.
Type of motion
No motion
Departing
Approaching
Motion with no meaningful direction
20 of 31
2019-12-02