Infineon XMC4700 Setup Manual page 24

Using Infineon's radar baseboard XMC4700 and BGT24LTR11 radar
shield with Arduino
Software set-up Set-up guide
Figure 30 Jumper wire connections on the Andee U
Turn on the 24 V DC power supply to the RGB LED lighting shield and connect the radar baseboard XMC4700
7.
to the PC via a USB cable onto the "Debug" USB port (Figure 31).
Figure 31 Connect the USB cable onto the debug port
Upload the code onto the board by clicking the "Upload" button (Figure 32).
8.
24 of 31
2019-12-02