Infineon XMC4700 Setup Manual page 22

Using Infineon's radar baseboard XMC4700 and BGT24LTR11 radar
shield with Arduino
Software set-up Set-up guide
Figure 26 Compilation successful
Attach the BGT24LTR11 radar shield to the radar baseboard XMC4700 via the SAMTEC connectors (Figure
4.
27).
Figure 27 Attach the BGT24LTR11 shield to the radar baseboard XMC4700
Stack the RGB LED lighting shield with XMC1202 onto the radar baseboard XMC4700 via the Arduino stack
5.
headers (Figure 28). Also connect an RGB LED and a 24 V DC power adapter to the RGB LED lighting shield.
Do not turn the power on yet! For more information on setting up of the RGB LED lighting shield, please
refer to the User Manual for the RGB LED Lighting Shield with XMC1202 (the link can be found in the
References section).
22 of 31
2019-12-02