Lcd Panel Interface - Epson S5U13L02P00C100 User Manual

Chapter 4 Technical Description

4.5 LCD Panel Interface

The LCD interface signals are available on connectors H2, H3 and H5.
For S1D13L02 LCD interface pin mapping, refer to the S1D13L02 Hardware Functional Specification, document
number XB0A-A-001.
Connectors H2and H3 are 0.1" x 0.1", 40-pin headers (20 x 2). Connector H5 is 0.5mm pitch, 40-pin FPC connector.
The following diagram shows the location of connectors H2, H3,and H5.
Note
Connector H2 and H3 are not mounted. H2 and
Figure 4-4: LCD Panel Connectors Location (H2, H3, H4)
For the pinout of connectors H2, H3,H4 and H5, see Section Chapter 6, "Schematic Diagrams" on page 20.
16 EPSON S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0)