Lcd Panel Interface - Epson S5U13L03P00C100 User Manual

Epson Research and Development
Vancouver Design Center

4.6 LCD Panel Interface

The LCD interface signals are available on connectors H3 and H5. For S1D13L03 LCD
interface pin mapping, refer to the S1D13L03Hardware Functional Specification,
document number xxxxxxxxxx.
ConnectorH3 is 0.1x0.1" 40-pin header (20x2), Connector H5 is 0.5mm pitch FPC
connector. For the pinout of connectorsH3 and H5, see "Schematic Diagrams" on page 21.
Note
The following diagram shows the location of the LCD panel connectors H3 and H5.
For the pinout of connectorsH3 and H5, see "Schematic Diagrams" on page 21.
S5U13L03P00C100 Evaluation Board User Manual
Issue Date: 2014/05/15
Connector H3 is no mounted. Connector H3 is optional. Therefore Connector H3 is only
allocated are for mounting. To use this area for mounting H3, it is recommended to use
the header of the size mentioned above.
Figure 4-3: LCD Panel Connectors Location (H3, H5)
Revision 1.0
Page 17
S1D13L03
XB1AG001