Host Interface; Direct Host Bus Interface Support - Epson S5U13L02P00C100 User Manual

Chapter 4 Technical Description

4.4 Host Interface

4.4.1 Direct Host Bus Interface Support

All S1D13L02 host interface pins are available on connector H1 which allows the S5U13L02P00C100 Evaluation
Board to be connected to a variety of development platforms. For detailed S1D13L02 pin mapping, refer to the
S1D13L02 Hardware Functional Specification, document number XB0AA001.
The following figure shows the location of host bus connector H1. H1 is not mounted. H1 connector is optional.
There is allocated space for the connector. If to use this allocated space , it is recommended to attach the 0.1 inch x
0.1 inch, 34-pin header (17 x 2).
Figure 4-2: Host Bus Connector Location (H1)
For the pinout of connector H1, see Section Chapter 6, "Schematic Diagrams" on page 20.
14 EPSON S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0)